A brand of LEIT

CBAM for exporting factories: what is asked of your factory?

If your factory exports to the European Union, this guide explains what CBAM is and whether it applies to your product. It also shows what your customer will ask you for, and where solar helps and where it does not. It is for information, not legal advice.

By the engineering team at pv.directLast updated: 21 November 2026

CBAM in brief.

CBAM, the Carbon Border Adjustment Mechanism, is a carbon price the European Union applies to certain goods as they enter its market, so that an imported good carries a carbon cost like the one a European factory carries.

The obligation lies with the EU importer, not your factory. The rules call it the authorised CBAM declarant. It files a yearly declaration of the emissions embedded in the goods, meaning those released while they were made, and buys CBAM certificates to match. Your factory is the source of that emissions data.

123456
Illustrative drawingThe path of the data and the path of the cost, from your factory to the EU importer.
  1. Direct emissions. From the fuel your factory burns and from the production process itself.
  2. Indirect emissions. From generating the electricity your factory consumes. The solar plant on the roof reduces what is drawn from the grid.
  3. The emissions data. A figure per tonne of product, calculated by the EU method, with the evidence behind it.
  4. The goods on their way to Europe. They enter the European Union under their customs code, and their data reaches the importer.
  5. The EU importer. It files the yearly declaration and buys CBAM certificates to match the emissions.
  6. The dates. Imports of 2026 are the first that need certificates, and the sale of certificates starts in February 2027.

Is your product covered by CBAM?

CBAM currently covers six sectors:

  • Cement.
  • Iron and steel.
  • Aluminium.
  • Fertilisers.
  • Hydrogen.
  • Electricity imported into the EU.

With them come some precursor materials and some goods made from them, such as pipes, screws, nuts and aluminium profiles. Textiles, food and most other goods are not covered at present.

The deciding factor is the product's customs code in the EU's Combined Nomenclature (CN). The list may grow: a European proposal would add goods made of iron and aluminium from 2028, and as of November 2026 it was still under negotiation.

There is also an exemption for an importer whose imports of CBAM goods total no more than 50 tonnes a year, except for electricity and hydrogen. The Commission reviews this threshold every year.

The dates that matter.

  • 1 January 2026: the definitive period began, after a transitional period of reports only; imports of 2026 are the first that need certificates.
  • 1 January 2027: the same rules also apply to goods imported into Iceland and Norway.
  • 1 February 2027: the sale of CBAM certificates starts, for imports of 2026.
  • 30 September 2027: the deadline for the first yearly declaration, for imports of 2026.
  • From 2026 to 2034: certificates cover a share of the emissions that grows each year, and all of them from 2034.

What will your EU customer ask you for?

They will ask for the emissions embedded in your product: how many tonnes of carbon dioxide equivalent (CO2e) per tonne of product, calculated by the EU method, over a full calendar year. Since 2026 they also ask for data used to work out the free allocation that is deducted from the number of certificates.

For your actual figures to be used, a verifier accredited by a national accreditation body in the European Union must verify them, and the verifier visits the factory. Contracting the verifier is the factory's task. You can also register your factory in the CBAM registry and share your data with your customers from there.

The rules do not oblige your factory to do this. But without verified actual data, your customer calculates with default values set by the European Commission, which carry a mark-up, so your actual figures are usually more advantageous for you both.

Where does solar help, and where does it not?

Solar does not change direct emissions; it reduces indirect emissions, which come from generating the electricity your factory consumes. But CBAM does not count indirect emissions in every sector.

What is counted in each sector under the rules in force in November 2026, with limited exceptions by customs code.
SectorEmissions countedEffect of the solar plant
CementDirect and indirectReduces the indirect part, subject to conditions
FertilisersDirect and indirectReduces the indirect part, subject to conditions
Iron and steelDirect onlyNone at present
AluminiumDirect onlyNone at present
HydrogenDirect onlyNone at present

For cement and fertilisers, the electricity from the solar plant at your factory is counted without emissions, on these conditions:

  • Your customer files the declaration with your factory's actual figures, not the default values.
  • A single-line diagram shows that the plant is connected directly to the factory.
  • Smart-meter readings show that the electricity was generated and consumed within the same hour.

So what counts is what your factory consumed from the plant at the time it was produced, not the surplus credited to you under net metering, nor green-energy certificates bought on the market. Direct emissions, usually the larger part, stay as they are, so the solar plant does not take your product out of CBAM.

If your product is iron or aluminium, or is not covered by CBAM, your customer may ask for the product's carbon footprint, and electricity is part of it. That is their request, not an effect on CBAM.

Grid-connected plants

Five steps you can start with.

  1. Find out whether your product is covered. Ask your EU customer for the customs code your product is imported under. This concerns you as well if your product reaches Europe through a trader, or if another factory makes a covered good from it.
  2. Measure electricity and fuel per product. Record what each production line consumes and how much it produces over the year.
  3. Agree the data with your customer. Ask what they need and when, and whether they will file the declaration with your actual figures or the default values.
  4. Reduce the emissions. Through more efficient use of fuel and energy. If your product is cement or fertiliser, a grid-connected solar plant sized to your consumption reduces the indirect part, on the conditions above.
  5. Keep the solar plant's readings. Record the plant's production and the factory's consumption by meter, hour by hour. Before you sign the plant's contract, ask how these readings will be recorded.

How to read a commercial electricity bill

What pv.direct does, and what it does not.

We design and build grid-connected solar plants. Your written offer shows the plant's expected production per year and calculates the carbon dioxide you avoid. That figure is an estimate based on the grid's emission factor; it is not your product's embedded emissions and cannot serve as CBAM data.

We do not provide CBAM reports, emissions verification or legal advice. Calculating your product's emissions is your factory's task, by the EU method, and you may bring in a specialist for it. The accredited verifier checks the calculation; it does not make it.

Your personal offer

European Commission: Carbon Border Adjustment Mechanism (CBAM)

European Commission: sector guidance for producers outside the EU

Dates and rules last checked: November 2026, on the European Commission's pages. The rules change, so check with your EU customer before any decision.
Your request's pathShort questions, A price on the screen, A written offer within one working day, The contract, Survey and installation

Your project file starts with your first answer.

Tell us a few details about your site; our team reviews them and prepares a preliminary study for you.

Start designing your plantTalk to an engineer